Справочник Пользователя для Crestron wmkb-1000l
Wall Mount Bracket Kit: WMKB-1000L
Description
The WMKB-1000L, a post-construction, optional wall mount kit, consists of brackets and mounting
hardware (refer to table below for list of items included). It is designed specifically for Crestron’s
4-inch wall-mounted touchpanels, the CT-1000 and LC-1000. The kit includes 10 individually packed,
single-use bags of mounting material. Conveniently, each bag contains a template, two brackets, and
four screws to mount one touchpanel.
hardware (refer to table below for list of items included). It is designed specifically for Crestron’s
4-inch wall-mounted touchpanels, the CT-1000 and LC-1000. The kit includes 10 individually packed,
single-use bags of mounting material. Conveniently, each bag contains a template, two brackets, and
four screws to mount one touchpanel.
Contents of WMKB-1000L
ITEM PART
#
QUANTITY
Mounting Bracket
4001193
20 (or 2 per bag)
Pan Phillips Screw, #4-40 x 1”
2007186
40 (or 4 per bag)
Template
2005025
10 (or 1 per bag)
Mounting Procedure
The Series 1000 touchpanel is a low-voltage unit that can be installed directly into a mounting surface.
Each touchpanel utilizes the mounting hardware provided in a single bag from the WMKB-1000L.
Complete the following mounting procedure in the order provided. The only tools required are
masking tape (or equivalent), a gypsum board saw (or equivalent), and a #2 Phillips tip screwdriver.
Each touchpanel utilizes the mounting hardware provided in a single bag from the WMKB-1000L.
Complete the following mounting procedure in the order provided. The only tools required are
masking tape (or equivalent), a gypsum board saw (or equivalent), and a #2 Phillips tip screwdriver.
1. Locate an area on the wall that is free of miscellaneous wiring and studs.
2. Make a small hole near the middle of the designated site; verify that the location is
suitable.
3. Using masking tape (or equivalent), fasten template to mounting surface; verify that the
template is level.
4. Cut out and remove the traced shape of the mounting surface (refer to illustration after
this step).
Removing Template Cut Out
FOR LC-10
00
AND CT-1
000
TEMPLAT
E- OV4005
4-1
( NOT FO
R BB-100
0 BACK B
OX )
Installation Guide - DOC. 6283
Wall Mount Bracket Kit: WMKB-1000L
• 1