Справочник Пользователя для Crestron qm-rmcrx

Crestron QM-RMCRX  

         QuickMedia™ Receiver/Processor

 

 

 

 
 

These two DB9 (male) software programmable, bi-directional serial ports are 
available for RS-232 communication, with hardware and software handshaking 
and modem control. Speeds are rated up to 115,200 bps. COM B can also be 
used as the console port. (Null modem cable is required to connect to a 
computer.) 

NOTE: RS-422 and RS-485 are not supported. 

 

1 

TO QM-RMCRX 

(DCD) Data Carrier Detect 

2 

To QM-RMCRX 

(RXD) Receive Data 

3 

From QM-RMCRX 

(TXD) Transmit Data 

4 

From QM-RMCRX 

(DTR) Data Terminal Ready 

5 

Common 

(SG) Signal Ground 

6 

From QM-RMCRX 

(DSR) Data Set Ready 

7 

From QM-RMCRX 

(RTS) Request To Send 

8 

To QM-RMCRX 

(CTS) Clear To Send 

9 

To QM-RMCRX 

(RI) Ring Indicator 

The QM-RMCRX front panel indicators are described as follows.  

This red LED indicates COM A port activity. 

This red LED indicates COM B port activity. Constant blinking indicates that 
the port is used for remote console connection. 

This red LED indicates IR port activity. 

This red LED indicates input activity. 

This green LED illuminates when the unit is connected to and receives 24 VDC 
power from an external power pack or from Cresnet.  

This yellow LED illuminates when the QM-RMCRX communicates with any 
device on the network.   

• 11