Справочник Пользователя для Crestron qm-rmcrx

Crestron QM-RMCRX  

         QuickMedia™ Receiver/Processor

 

Due to production changes, recently manufactured QM-RMCRX devices are not 
compatible with specific QM-WMC devices. Similarly, newer QM-WMC 
devices are not compatible with specific QM-RMCRX devices.  

To insure compatibility between a QM-RMCRX and QM-WMC, refer to the 
following that lists part numbers for the QM-RMCRX along with compatible 
part numbers for the QM-WMC. Refer to the following chart. 

6002008 6002013 

6002432 

6002423 

NOTE: Part numbers can be found on the silver label affixed to each device. 

If you have a part that is not compatible with your existing equipment, contact 
Crestron's Customer Support Group for replacement information. 

QuickMedia fully integrates the display device with the system. Consequently, 
careful selection of a display device is required to take full advantage of this 
capability. A projector should support discrete video switching commands. This 
enables the QuickMedia receiver/processor to seamlessly pass along the three 
different video types to the display and alert the display to switch inputs.  

In addition, the display device should support discrete power on and off 
commands. This enables a system “Room On” button function that will energize 
the display. If the display device has a toggle on/off power command, there is a 
possibility of getting out of sync with the room power. Most RS-232 display 
drivers in the Crestron database support discrete commands. Refer to the 
Crestron Database in System Builder or the Dealer/Tech Resources | Whose 
Products Do We Control? section of the Crestron website (

) 

for a list of products. You may search by manufacturer or device type. You may 
also call the Crestron customer service team or check our online help system for 
the latest information. 

• 5