Справочник Пользователя для Velleman CS5MXP

CS5MXP 

VELLEMAN 

- 2 -

 
To all residents of the European Union 
Important environmental information about this product 

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm 
the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to 
a specialized company for recycling. This device should be returned to your distributor or to a local 
recycling service. Respect the local environmental rules. 

If in doubt, contact your local waste disposal authorities. 
 
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the 
device was damaged in transit, do not install or use it and contact your dealer. 
 
1. 

Assemble and adjust for length (Twist surplus lead around stem) 

 
2. Insert 

batteries 

 
3. 

Set DISC 1 (top right) to ALL METAL (fully anticlockwise). 

 
4. 

Set DISC 2 (bottom far right) to 5. 

 
5. 

Set SENSITIVITY (top left) to 3 o'clock position. 

 
6. 

Push BATT CHECK down and hold to indicate battery condition. Good batteries will be in the green area on 
the meter. Release. 

 
7. 

Set BOOST to NORMAL. 

 
You are now in ALL METAL MOTION MODE. 
 
You will find all metals within the search head range including iron and trash PROVIDING THE SEARCH HEAD IS 
MOVING OVER THE TARGET (Not stationary). 
 
To ignore these low value metals : 
 
8. 

Adjust DISC 1 (top right) to position 5. 

 
You are now in DISCRIMINATING MOTION MODE. 
 
The other modes requires more detailed explanation acquired from reading the full instructions. 
 
IF A PROBLEM IS ENCOUNTERED REFER TO FULL INSTRUCTIONS