Справочник Пользователя для Korg es1mkii

46

5. Pattern mode

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Pattern Set is a function that lets you assign your favorite patterns
to each of the sixteen step keys, and switch them at the touch of a
key.
During playback, you can successively switch patterns to perform
a song.
By using the SELECT key in conjunction with this to switch pat-
tern set groups, you can register and select 16 × 4 (total of 64) pat-
terns.

Press the Play/Pause key to begin playback.
Hold down the PATTERN SET key and press a step key to switch
to the pattern that was registered for that step key.
By holding down the PATTERN SET key and pressing a SELECT
key, you can switch to a different group of registered pattern sets.
The pattern set group will be indicated by the lower line of the
Select LEDs (red).
By holding down the SHIFT key and pressing the PATTERN SET
key, you can hold the Pattern Set function (the key will light).
To defeat the Hold condition, press the PATTERN SET key once
again (the key will go dark).

1     2     3     4     5           14   15   16       

1
2
3
4

A01   A30  B03  B04   A51           A31   B43   B61

B21   B23  B56  B64   B28           B21   A07   A08

B01   B02  B04  B62   A04           A05   A45   A64

A11   A12  A13  A14   A15           A24   A25  A26

Example

Step key

Select LED

Pattern set 1

Pattern set 3

Hold down the SHIFT key and 
press the Pattern Set key to 
hold the function

In Pattern Set Play, the timing at which patterns will change, tempo
adjustment, and functions such as Reset & Play etc. are the same
as for Pattern Play.

Pattern Set cannot be used during recording. When you en-
ter recording (ready) mode, Pattern Set will be cancelled.

1. With playback stopped, continue pressing the PATTERN SET

key (or Hold it) and press the step key for the location that you
wish to register.

2. While continuing to press the PATTERN SET key (or while Hold

is still in effect), rotate the dial to select the pattern number that
you wish to register. Release the PATTERN SET key (or defeat
Hold) to complete the registration process.

3. To save the pattern set registrations, press the Stop/Cancel key

to stop playback. Continue pressing the PATTERN SET  key,
and press the WRITE key (the Write key will blink).

4. The display will blink "

" Press the WRITE  key once again

to save the data.

To cancel, press the Stop/Cancel key.

If the Global mode Memory Protect setting is on, it will not
be possible to write the data. In this case, turn of f the Global
mode Memory Protect setting before you execute the W rite
operation.

Never turn the power of f during the W rite operation. This may
damage the data.

2

1

1,2

3,4