Справочник Пользователя для Cadillac eldorado 2001

Your vehicle may be equipped with the following
features that can be individually programmed,
memorized or personalized for up to two drivers. 
For a brief description of each feature, look up each
feature for a page reference in the Index.

To begin programming,
adjust the driver’s seat
(including lumbar
adjustments) and both
outside mirrors to a
comfortable position and
then press the SET button.
Within five seconds, 
press button “1.”

A second mirror and seating position may be
programmed by repeating the above steps and pressing
button “2” instead of button 1. Each time a memory
button is pressed, a single beep will sound through the
left front speaker.

If your vehicle is in PARK (P), you can recall mirror 
and seating positions by briefly pressing button 1 or 2.
This will adjust the seat and mirrors to where you have
previously programmed them. If you have accidentally
pressed one of the memory recall buttons and want to stop
seat or mirror movement, press one of the manual seat or
mirror control buttons. This cancels a memory recall.

You can also recall a seat and mirror position if your
vehicle is not in PARK (P). Press and hold either the 
1 or 2 button until seat and mirror movement is
complete. Releasing the buttons will stop adjustment.

The EXIT button can be programmed to allow easy exit
for up to two drivers. Adjust the seat to a comfortable
“exit” position and then press the SET button followed
by the EXIT button. While your vehicle is in PARK (P),
briefly press the EXIT button to recall your programmed
exit position.

Your vehicle’s ignition must be in RUN. To begin
programming, press and hold the SKIP INFO and NO
INFO RESET buttons at the same time to display the
following prompts.