Справочник Пользователя для Brother hl-1650-1670n

The printer prints unexpectedly
or it prints garbage.

•  Make sure the printer cable is not too long.  We recommend you

use a parallel cable of less than 2 metres (6 1/2 feet) in length.

•  Check if the printer cable is damaged or broken.

•  If you are using an interface switching device, remove it and then

connect your computer directly to your printer and try again.

•  Check that the appropriate printer driver is selected in ‘Set as

Default’.

•  Check that the printer is not connected to the same port that is

also connected to a mass storage device or scanner. Remove all
other devices and connect the port to the printer only.

•  Turn off the status monitor in the Device / Options page on the

Advanced tab in the printer driver.

The printer cannot print full
pages of a document.  An error
message “PRINT OVERRUN”
occurs.

• Press 

the 

 switch to print the data remaining in the printer.

•  If this does not clear the error, reduce the complexity of your

document or reduce the print resolution.

•  Change the following settings in the supplied Windows

®

 driver

and then try again.  The best combination of settings below will
vary depending on your document.

• Graphics Mode

• True 

Type 

mode

•  Use Printer True Type Fonts

The printer cannot print full
pages of a document. A
"MEMORY FULL" error
message occurs.

• Press 

the 

 switch to print the data remaining in the printer.

•  Reduce the print resolution or reduce the complexity of your

document.

• 

Expand the printer memory by adding a commercially available
DIMM.