Справочник Пользователя для Honeywell equip hd3mdih
24
Installation and Setup
Mounting the Camera
Surface Mount
1. Secure the skirt to the ceiling (hardware
not supplied) or to the wall using the
supplied screws.
supplied screws.
Note
You must use screws that are able to
support at least three times the weight
of the camera.
support at least three times the weight
of the camera.
2. Connect the wires (see
).
3. Rotate and align the camera assembly
yellow label with the skirt yellow label.
4. Secure the camera assembly to the skirt by
pushing it into the skirt, then twisting it
clockwise until it clicks securely in place.
clockwise until it clicks securely in place.
5. Secure the camera assembly to the skirt by
twisting it clockwise until it clicks securely
in place.
in place.
6. Adjust the camera’s field of view (see
).
7. Install the turret by clicking it into place.
8. Install the bubble by placing it on the camera with the tabs to the left of the slots, then
8. Install the bubble by placing it on the camera with the tabs to the left of the slots, then
turning it clockwise until the tabs click securely into place.
Skirt
Camera
assembly
assembly
Turret
Dome bubble
Screws
(supplied)
(supplied)