Справочник Пользователя для Honeywell equip hd3mdih

Document 800-07361 Rev A

37

12/10

1. In the Discovery pane, select the device and click Connect 

.

2. From the System tab click the Obtain an IP Address automatically check box. 
3. Enter a Device Name, for example, FrontLobbyDome01

.

 

4. Click Apply. 

The network automatically assigns the IP Address based on the DHCP network server 
details. If no DHCP server is present on the network, the hardware defaults to an 
APIPA address (169.254.x.x).

When manually updating the network settings, it is important to enter 
the correct IP network settings before applying them. Incorrect values 
might cause a failure when connecting to the device. See 

for definitions of each setting.

1. In the Discovery pane, select the device, and click Connect 

.

2. To assign a static IP address to the device, from the System tab click to clear the 

Obtain an IP Address automatically check box. 

3. Enter a Device Name, for example, FrontLobby01.

The MAC address is a factory-assigned address that is unique for each 
device.

4. Enter an IP Address of the device on the network. 

The address must be in the same address range. For example, if the PC is 
192.168.1.xx, then the device should be set to a similar address, for example 
192.168.1.xy.

5. Enter the device Subnet Mask value. A value is required. 
6. Enter a default Gateway Address that connects the device to the static network. A 

value is required. 

7. Click Apply. 

The network settings are updated and a message displays in the status bar to confirm 
the update.