Справочник Пользователя для VTech telephone ls6326-5

Install the battery as shown below. After 

installing the battery, you may be able to make 

and receive short calls. For best performance, 

charge the handset battery for at least 16 hours 

before use.

Press 

 or  . 

You hear a dial tone.
Dial the number.

Dial the number.
Press 

or 

.

Press 

, 

 or any of the dialing keys 

(

0

-

9

, 

#,

 

).

Press 

 or put the handset in the 

telephone base or charger.

1.

2.

1.
2.

Install the telephone base and charger(s) as 

shown below.

Use only the power adapters and batteries 

supplied with your VTech telephone.
For complete feature instructions, please 

refer to your user’s manual.

•

•

Telephone base

Telephone    

 line cord

Telephone 

base power 

adapter 

Telephone 

wall jack

If you have  

DSL high   

speed 

Internet  

service, a 

DSL filter (not 

included) is 

required.

Charger 

adapter

Charger

1

2

3

4

Plug the battery 

connector securely 

into the socket inside 

the handset battery 

compartment, matching 

the color-coded label.

Place the battery with  

the label 

THIS SIDE UP 

facing up and the wires  

inside the battery 

compartment. 

Align the cover flat 

against the battery 

compartment, then slide 

it towards the center of 

the handset until it clicks 

into place.

Charge the handset by 

placing it in the telephone 

base or charger. The 

CHARGE light is on when 

the handset charges.

If the battery 

compartment cover is on 

the handset, press on the 

indentation and slide the 

cover to remove.

5

Electrical 

outlet not 

controlled by 

a wall switch

CHARGE 

light

You can directly broadcast messages from one 

handset to the speakerphone of one or all other 

handsets. Any handset you call can respond by 

pressing 

PUSH TO TALK to begin a two-way 

communication. 
When the connection is made, both the caller 

and the destination handsets display 

and hold [PTT] to talk and beep once. 
Only one handset can be talk at a time. To do 

so, press and hold 

PUSH TO TALK.

For complete PTT instructions, please refer 

to your user’s manual.