Справочник Пользователя для Honeywell av8or
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-46 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
o
Tap
to open the list of
results before it appears automatically.
4. Pick the settlement from the list.
4. Tap
the
soft Key.
5. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
automatically calculated, and you can start navigating.
Entering an Address with a Postal Code
All of the above address searching possibilities can be performed
with entering the postal code instead of the settlement name. Find
below an example with a full address:
The procedure is explained starting from the Navigation menu.
with entering the postal code instead of the settlement name. Find
below an example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following soft Keys:
(Simple mode), or
,
(Advanced mode).
2. By
default,
Go Drive proposes the country/state and settlement
where you are. If needed, tap the soft Key with the name of the
country/state, and select a different one from the list.
country/state, and select a different one from the list.
3. Tap the soft Key with the name of the settlement, and enter the
postal code:
1. Start entering the postal code on the keyboard.
2. Get to the list of results:
2. Get to the list of results:
o
After entering a couple of numbers, the ones that
are a match appear in a list.
o
Tap
to open the list of
results before it appears automatically.
3. Pick the settlement from the list.