Справочник Пользователя для Hannspree JT01-32E2

OSD

M a n u a l   S t o r e

N a m e

S e l e c t

E x i t

C h a n n e l

MENU

A u t o   S c a n

U K

1

9

8

7

6

5

4

3

2

1

8

9

10

11

12

14

13

5

4

3

2

6

7

Front View

Front View

JT2002310661P

This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions. 

© Copyright 2007 Hannspree, Inc.  All rights reserved.

1. Volume down button
2. Volume up button
3. OSD Menu button 
4. Channel down button
5. Channel up button

6. Enter button
7. Power button
8. Infrared receiver
9. Power LED indicator

1. Connect one end of the UHF/VHF (Antenna) 

or CATV cable to the TV IN jack (UHF/VHF  
IN jack) on the back of the TV.

2. Connect the other end of the UHF/VHF 

(Antenna) or the CATV cable to the Antenna 
or CATV socket.

The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player. 

1. Plug the power connector into the AC-IN

input jack on the rear cover of the TV-set. 

2. Insert the three-pronged plug at the other

end of the power cord into a power outlet.

3. Turn the main power switch on to supply 

power to the TV.

1. Make sure your TV is turned on and a device 
  such as a DVD player is connected.

2. Press the 

SOURCE button on the remote 

  control and use the  /  button to select 
  the required input source between PC, HDMI1, 
  HDMI2, TV, YPbPr, AV, SVIDEO, SCART1, 
  SCART2, and SCART2-SV.
3. Press 

ENTER to confirm your selection.

Follow the instructions below to automatically preset the channels for your TV 
before watching it for the first time.
 
1. Press the "

MENU" button on your remote control or the control panel.

2. Use the  /  button to select Channel Menu.
3. Press the  /  button to select country.
4. Press the "

ENTER" button to start Auto Scan.

Rear View

Rear View

8.   S-Video Input
9.   YPbPr/ HD Component Video Input 
10. VGA (15 pin) Signal Input from Computer
11. HDMI2 Input Terminal (19 pin)
12. HDMI1 Input Terminal (19 pin)
13. AC Power Input 
14. AC Power Switch

1. Audio Output for AV, S-Video or YPbPr
    components (L/R)
2. Audio Input for AV, S-Video or YPbPr/ 
    HDMI-DVI components (L/R)
3. Audio Input for VGA
4. RF Antenna / Cable TV Input
5. SCART2 / SCART2-SV Input
6. SCART1 Input
7. Composite Video input

Note: After performing Auto Scan, you need not do it again when turning 

 

on your TV next time.