Справочник Пользователя для ZyXEL Communications NWA3160

ZyXEL NWA-3160 Series User’s Guide

This chapter provides information on the Remote Management screens. 

Remote management allows you to determine which services/protocols can access which of 
the ZyXEL Device’s interfaces (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:

To disable remote management of a service, select Disable in the corresponding Server 
Access field.
You may only have one remote management session running at a time. The ZyXEL Device 
automatically disconnects a remote management session of lower priority when another 
remote management session of higher priority starts. The priorities for the different types of 
remote management sessions are as follows.

1 Telnet
2 HTTP

Remote management over LAN or WLAN will not work when:

1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP field does not match the client IP address. If it 

does not match, the ZyXEL Device will disconnect the session immediately.

3 There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

There is a default system management idle timeout of five minutes (three hundred seconds). 
The ZyXEL Device automatically logs you out if the management session remains idle for 
longer than this timeout period. The management session does not time out when a statistics 
screen is polling. You can change the timeout period in the System screen

Table 60   Remote Management Overview

•

WLAN

•

ALL (LAN and WLAN)

•

LAN only

•

Neither (Disable).