Справочник Пользователя для ZyXEL Communications NWA3160

Chapter 3 Tutorial

ZyXEL NWA-3160 Series User’s Guide

• In  the  Send Immediate Alert section, select the events you want to trigger immediate e-

mails. Ensure that Rogue AP is selected. 

• Click Apply.

Access point A is now configured to do the following.

• Scan for access points in its coverage area every ten minutes.
• Recognize friendly access points from a list.
• Send immediate alerts to your email account if it detects an access point not on the list.

Now you need to configure the other wireless access points on your network to do the same 
things.
For each access point, take the following steps.

1 From a computer on the wired network, enter the access point’s IP address and login to 

its Web configurator. See 

 for the example IP addresses.

2 Import the friendly AP list. Click ROGUE AP > Configuration > Browse.... Find the 

“Flist” file where you previously saved it on the network and click Open. 

3 Click Import. Check the ROGUE AP > Friendly AP screen to ensure that the friendly 

AP list has been correctly uploaded.

4 Activate periodic rogue AP detection. See 

.

5 Set up e-mail logs as in 

, but change the Mail Subject field so 

you can tell which AP the alerts come from (“ALERT_Access_Point_B”, etc.)

Next, test your setup to ensure it is correctly configured. 

• Log into each AP’s Web configurator and click ROGUE AP > Rogue AP. Click Refresh. 

If any of the MAC addresses from 

 appear in the list, the friendly AP 

function may be incorrectly configured - check the ROGUE AP > Friendly AP screen. 
If any entries appear in the rogue AP list that are not in 

AP’s MAC address for future reference and check your e-mail inbox. If you have received 
a rogue AP alert, email alerts are correctly configured on that ZyXEL Device.

• If you have another access point that is not used in your network, make a note of its MAC 

address and set it up next to each of your ZyXEL Devices in turn while the network is 
running. 
Either wait for at least ten minutes (to ensure the ZyXEL Device performs a scan in that 
time) or login to the ZyXEL Device’s Web configurator and click ROGUE AP > Rogue 
AP > Refresh to have the ZyXEL Device perform a scan immediately.

• Check the ROGUE AP > Rogue AP screen. You should see an entry in the list with 

the same MAC address as your “rogue” AP.

• Check the LOGS > View Logs screen. You should see a Rogue AP Detection entry 

in red text, including the MAC address of your “rogue” AP.

• Check your e-mail. You should have received at least one e-mail alert (your other 

ZyXEL Devices may also have sent alerts, depending on their proximity and the 
output power of your “rogue” AP).