Справочник Пользователя для Uniden 6035 + 1

14

Line up the holes on each side of the handset. To attach the belt clip, insert into 

the holes on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs from 

the holes.

Route the AC adapter cord through the “LOOP” of base’s back as shown.

1) 

Connect the AC adapter to the DC IN 9V jack.

2) 

CAUTION: To avoid risk of fi re and shock, only use the 

Uniden AAD-041S  AC adapter.

Connect the AC adapter to a standard 240V AC wall outlet. 

3) 

DO NOT use an AC outlet controlled by a wall switch. 
Place the handset in the base with the LCD screen facing 

4) 

forward.
Make sure that the charge LED illuminates. If the LED does 

5) 

not illuminate, check to see that the AC adapter is plugged 

in and the handset makes good contact with the charging 

contacts.
Charge your handset at least 15 to 20 hours before plugging 

6) 

into the phone line.

DECT6035, 6035+1 OM.indb   14

DECT6035, 6035+1 OM.indb   14

8/8/07   3:25:40 PM

8/8/07   3:25:40 PM