Справочник Пользователя для Hoyt recurve-2006
11
String Length Recommendations
Riser Length Long Limbs Medium Limbs Short Limbs
Short Riser (23”) 68” bow
Short Riser (23”) 68” bow
66” bow
64” bow
65” string 63” string 61” string
165cmstring 160 cm string 155 cm string
Long Riser (25”) 70” bow
68” bow
66” bow
67“ string 65” string 63” string
170 cm string 165 cm string 160 cmstring
Adjusting Yo u r Pocket Alignment (select models)
An adjustable pocket system allows you to adjust the limb pock-
ets to achieve optimum limb/riser alignment. This allows archers
to more easily determine center shot, but has little effect on accu-
racy or shootability. Alignment and radial angle of the dowel are
accomplished at the factory and there is normally no need to
change the settings.
An adjustable pocket system allows you to adjust the limb pock-
ets to achieve optimum limb/riser alignment. This allows archers
to more easily determine center shot, but has little effect on accu-
racy or shootability. Alignment and radial angle of the dowel are
accomplished at the factory and there is normally no need to
change the settings.
Improved Hoyt Dovetail System Instructions
Your 2006 Hoyt recurve riser is equipped with an improved ver-
sion of the Hardlock dovetail system. The redesigned dowel
allows you to make weight and/or tiller changes over a larger
range without the need for a radial adjustment of the dowel. In
addition, the stronger dowel material allows use of a 3/16 Allen
wrench (supplied), which makes locking the system faster and
easier.
Your 2006 Hoyt recurve riser is equipped with an improved ver-
sion of the Hardlock dovetail system. The redesigned dowel
allows you to make weight and/or tiller changes over a larger
range without the need for a radial adjustment of the dowel. In
addition, the stronger dowel material allows use of a 3/16 Allen
wrench (supplied), which makes locking the system faster and
easier.
The only additional consideration is that the ideal radial position
of the dowel is pre-set at the factory. We recommend using a
pencil or other marking tool to mark the dowel before moving it
to ensure a return to the optimal position.
of the dowel is pre-set at the factory. We recommend using a
pencil or other marking tool to mark the dowel before moving it
to ensure a return to the optimal position.
A dowel that is not in the optimal radial position does not affect