Справочник Пользователя для Crestron pmk-3000l

 

Pre-Construction Mount Kit: PMK-3000L

 

The PMK-3000L is a pre-construction mount kit for the 
Crestron Isys™ TPS-3000L, wall mounted touchpanel. 
The PMK-3000L includes an 18 AWG bus wire to secure 
touchpanel cabling during drywall installation and to 
avoid damaging the cables when the opening is routed. 
Refer to the physical views (top, side, and front) of the 
PMK-3000L, shown after this paragraph. The table that 
follows lists all parts included with the PMK-3000L. 

 

 

 

COVER PLATE MTCV02883-1

SECURE 18 AWG BUS WIRE
IN NOTCH TO HANG CABLE AWAY
FROM DRYWALL CUTTING TOOLS

FOR DRYWALL NAIL
(PROVIDED BY OTHER)

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

FOR DRYWALL NAIL

(PROVIDED BY OTHER)

FOR DRYWALL SCREW
(PROVIDED BY OTHER)

PINS USED WITH OPTIONAL MUDRING (MTPL02850-1)

FOR DRYWALL NAIL

(PROVIDED BY OTHER)

0.06 in THICK

(0.15 cm)

4.12 in

(10.47 cm)

4.88 in

(12.38 cm)

21/32" STUD OFFSET

(17 mm)

0.27 in

(0.69 cm)

7.30 in

(18.54 cm)

7.84 in

(19.91 cm)

11.59 in

(29.44 cm)

7.375 in

(18.73 cm)

9.00 in

(22.86 cm)

0.03 in

(0.08 cm)

The plate is designed to provide the necessary support for 
a single touchpanel and can mount to the right or left side 
of a stud. Confirm that the PMK-3000L is level before 
application of drywall. A rectangular opening with the 
dimensions shown in the illustration after this paragraph 
must be made in the drywall. Verify that the opening 
exposes the #6-32 tapped holes in each corner. 

Metal, Plate, Mounting 

MTPL02849-1

1

Metal, Plate,Cover 

MTCV02883-1

1

Screw, #6-32, 1 1/2”Lg, Pan, Phil  SR06-32-1R5000-2

4

Jumper wire, 12”Lg, 18AWG, 

Bl k

WCUSJU18-5

1

 

If the opening for the touchpanel in the drywall is too 
large, two pre-construction accessories are available to 
make adjustments. Use the optional TMK-3000L (Trim 
Ring Kit) to provide a smooth edge at the opening. This 
option provides a finished appearance and is preferred 
when wallpaper is hung. Use the optional MMK-3000L 
(Mud Ring Kit) to fill in larger irregularities around the 
opening (requires plastering).  

The PMK-3000L consists of a single metal plate, which 
fastens to the stud of a framed wall prior to hanging 
drywall (shown after this paragraph). Standard drywall 
nails or screws to attach the PMK-3000L are not supplied 
(length can vary). 

Complete the installation by either installing the 
touchpanel, leaving the hole open (if permitted by local 
building codes), or installing the supplied cover plate with 
#6-32 x 1½” screws (shown after this paragraph).  

 

 

15 Volvo Drive   Rockleigh, NJ 07647

   

Tel: 888.CRESTRON

 

Fax: 201.767.7576

Specifications subject to 

www.crestron.com

change without notice.