Справочник Пользователя для Crestron pac2

Professional Automation Computer 

 

Crestron PAC2

2.  Select the network ID of the touchpanel, as set in SIMPL Windows and 

configured on the touchpanel, from the drop-down list. 

3.  Browse to the HEX or VTZ file to be uploaded. If the file is a HEX 

file, click Open to begin the transfer.  
 
If the file is a VTZ file, choose the pages to send to the TPS panel. The 
choices are as follows: 

- 

All Files in Project: sends the entire project. 

- 

Only Changed Files: sends only the files that are different from 
those that are currently stored in the panel. Note that if any pages 
in the panel are not present in the project, those pages will be 
deleted from the panel. 

- Additional 

choices 

include 

Do not send graphic files and Do not 

send sound files. These are often very large files that need not be 
reloaded with every transfer. 

As with all 2-Series control systems, operating system files for the PAC2 have a .cuz 
extension. You can obtain .cuz updates (when available) from the software 
downloads area of the Crestron website. To download an update, click the .cuz file 
and choose the Save to Disk option, then specify the directory where the update will 
be stored. 

NOTE: In some cases Microsoft's Internet Explorer may append a .zip extension to a 
downloaded .cuz file. For example, a file called "C2-1008.cuz" may appear as "C2-
1008.cuz.zip." If this happens, rename the file, removing the .zip extension. 

To upload the new .cuz to the control system: 

1.  Open Viewport and select File Transfer | Update Control System.  

2.  Browse to the .cuz file and click Open to start the transfer. 

3.  After the transfer is complete, the PAC2 will automatically reboot. To 

confirm the transfer, click Diagnostics | Check Ops Version. The 
Viewport console should display the new .cuz version number. 

On power-up or a hardware reset (HW-R), the control system first checks for a 
program on compact flash and then internal flash. The console command 
CFAUTORUN controls the actions of the control system when a compact flash is 
inserted into a running system. If CFAUTORUN is enabled, when a compact flash 
card is inserted or removed from the system, the system automatically performs a 
program reset (SW-R) and the boot order described above is used to find the 
program to run. If CFAUTORUN is disabled, then the user must either press the 
SW-R button on the top panel or issue a program reset through the Viewport to 
switch programs. The PAC2 is shipped with CFAUTORUN enabled. 

In addition to the previous topics that are impacted by compact flash availability, 
other Viewport command functions-including Erase Program, Erase Web Pages, and 

•  Professional Automation Computer: PAC2