Справочник Пользователя для National Instruments NI PXI-8104

•

The Chipset 945GMCH (Graphics and Memory Controller Hub) 
connects to the CPU, DDR2 SDRAM, and DVI-I video.

•

The SMB to PXI Trigger provides a routable connection of the 
PXI triggers to/from the SMB on the front panel.

•

The Watchdog Timer block consists of a watchdog timer that can reset 
the controller or generate a trigger.

•

The Chipset ICH7M connects to the PCI, USB, IDE, SATA, and 
LPC buses.

•

The USB Connectors are connected to the ICH7M chipset.

•

The PXI Connector connects the NI PXI-8104 to the PXI/CompactPCI 
backplane.

•

The Super I/O block represents the other peripherals supplied by the 
NI PXI-8104. The NI PXI-8104 has one serial port, and an ECP/EPP 
parallel port.

•

The Gigabit Ethernet connects to either 10 Mbit, 100 Mbit, or 
1,000 Mbit Ethernet interfaces.

•

The SATA block connects a Serial ATA hard drive to the ICH7M.

•

The ATA-100 IDE block is dedicated PCI-IDE circuitry providing fast 
ATA-100 transfers to the internal 2.5 in. hard drive. The IDE feature is 
built into the chipset. The hard drive is 30 GB or larger. 

National Instruments has developed several software tools you can use with 
the NI PXI-8104.

National Instruments’ hardware and software work together to help you 
make the most of your PXI system. The LabVIEW, Measurement Studio, 
and LabWindows

™

/CVI

™

 application development environments combine 

with leading hardware drivers such as NI-DAQmx to provide exceptional 
control of NI hardware. Instrument drivers are available at 

ni.com/idnet

 

to simplify communication with instruments over a variety of busses.