Справочник Пользователя для Chamberlain 3585s 3-4 hp

7

1.  READ AND FOLLOW ALL INSTALLATION WARNINGS AND 

INSTRUCTIONS.

2.  Install garage door opener ONLY on properly balanced and 

lubricated garage door. An improperly balanced door may 
not reverse when required and could result in SEVERE 
INJURY or DEATH. 

3.  ALL repairs to cables, spring assemblies and other 

hardware MUST be made by a trained door systems 
technician BEFORE installing opener.

4.  Disable ALL locks and remove ALL ropes connected to 

garage door BEFORE installing opener to avoid 
entanglement.

5.  Install garage door opener 7 feet (2.13 m) or more 

above floor.

6.  Mount emergency release handle 6 feet (1.83 m)

above floor.

7.  NEVER connect garage door opener to power source until 

instructed to do so. 

  8.  NEVER wear watches, rings or loose clothing while 

installing or servicing opener. They could be caught in 
garage door or opener mechanisms.

  9.  Install wall-mounted garage door control:  
 

• within sight of the garage door. 

 

•  out of reach of children at minimum height of 5 feet

(1.5 m).

 

• away from ALL moving parts of the door.

10.  Place entrapment warning label on wall next to garage 

door control.

11.  Place manual release/safety reverse test label in plain view 

on inside of garage door.

12.  Upon completion of installation, test safety reversal 

system. Door MUST reverse on contact with a 1-1/2" 
(3.8 cm) high object (or a 2x4 laid flat) on the floor.

•  Position the belt cap retainer over the motor unit 

sprocket so the two holes in cap align with the two holes 
in mounting plate. Attach with 8x3/8" hex screws 
provided.

To avoid possible SERIOUS INJURY to fingers from moving 
garage door opener:
•  ALWAYS keep hand clear of sprocket while operating opener.
• Securely attach sprocket cover BEFORE operating.

Hex Screw
#8x3/8"

Motor Unit 
Sprocket

Mounting Plate

Hex Screws 
8x3/8" 

Belt Cap
Retainer