Справочник Пользователя для Bay Technical Associates BayTech DS72
DS72 Host Module
19
Select option 1, to disable the echo. The Default setting is Disabled.
Select option 2 to echo the module and port number. (i.e. 3,2)
Select option 3 to echo the device name. (Device A)
Select option 2 to echo the module and port number. (i.e. 3,2)
Select option 3 to echo the device name. (Device A)
Login Setup
This menu allows the user to enable or disable the Header, Access Control, Menu, Manage Users, Auto
Connect, Dial Back Number, and Assign User Ports.
Connect, Dial Back Number, and Assign User Ports.
Header
If enabled, the following header appears with the main menu upon initialization of power or after a
modem connection to the host module has been established. I f disabled, the header does not appear
with the main menu. Default Header is enabled.
modem connection to the host module has been established. I f disabled, the header does not appear
with the main menu. Default Header is enabled.
Access Control
This feature configures the Serial and Network port access by enabling the module to prompt for user
name and password. Default for both is disabled.
name and password. Default for both is disabled.
Login Setup:
Header......................1 Enable/Disable Header for each menu
Access Control..............2 Enable/Disable Network/Serial port
user name and password
Manage Users................3 Add/Delete users and change passwords
Exit.....................X,CR
Exit.....................X,CR
BAYTECH
For further information check:
http://www.baytech.net/
http://www.baytech.net/
DS71MD4
<=
Device name Port echo.
or
02,1
02,1
<=
Module and Port Number echo.
Port ID Echo is...................Disabled
Disable Port ID Echo..............1
Use Module, Port Number...........2
Use Device Name...................3
Exit..............................X,CR
Disable Port ID Echo..............1
Use Module, Port Number...........2
Use Device Name...................3
Exit..............................X,CR
Header is.........................Enabled
Enable ? (Y/N, CR for no change) :
Enable ? (Y/N, CR for no change) :