Справочник Пользователя для Bay Technical Associates BayTech DS72
DS72 Host Module
26
Upgrade Firmware
Currently, While this option is available, the DS72 upgrades it’s firmware through removable
EPROMS.
EPROMS.
Select 1), to Enable Firmware Upgrade, the Host Module responds:
IMPORTANCE: Do not type ‘Y’ unless you have received the instructions and firmware from
Baytech’s Technical Support. If you typed ’Y’ and see the following below, turn power off
than back on to the unit to close the firmware upgrade.
Baytech’s Technical Support. If you typed ’Y’ and see the following below, turn power off
than back on to the unit to close the firmware upgrade.
If you selected this option by mistake, to get out of this option power the unit off and on.
Pressing <cr> and the module respond with “DS72 Ready”
Pressing <cr> and the module respond with “DS72 Ready”
Select 2), to enter the FTP name, the module responds:
NOTE: The name and password is part of the user/password used by the FTP program to
access the module.
access the module.
Select 3) to enter the FTP password, the module responds:
If you enter an incorrect “old” password the module will continues to request for the “old” password.
Active Restore
When the no activity timer is set, after a predetermined time, an internal program restores the
communications links to all ports. Selecting this option and the Host Module responds:
communications links to all ports. Selecting this option and the Host Module responds:
Upgrade Firmware................1
allow the firmware to be updated via ftp
Set FTP User Name...............2
Name used by FTP program to login
Set FTP User Password...........3
Password used by FTP program to login
Exit............................X,CR
Upgrade will terminate all other processes until
code upload is complete and unit is reset.
Have new firmware file ready at workstation before proceeding.
code upload is complete and unit is reset.
Have new firmware file ready at workstation before proceeding.
Do you wish to continue? (Y/N):y
Ready to upload code file.
User logged off.
User logged off.
Enter username (<= 9 characters)>
Enter old password (CR if none)>
Enter new password (<= 9 characters)>
Enter new password (<= 9 characters)>
Confirm by re-entering new password>
Password change successful.
Password change successful.