Справочник Пользователя для Bay Technical Associates BayTech DS72
DS72 Host Module
31
Network Interface
Logged Users
Unit Reset
IMPORTANT: Unit reset terminates both internal and external modem connections.
NOTE: You must be connected to the DS71-MD4 module to reset the unit. Resetting the unit
does not return user selections to their default settings.
does not return user selections to their default settings.
Select “Reset Unit” followed by <cr>. The module resets the unit and displays:
Allow approximately 10 seconds for the unit to reset. It should state something similar to:
Troubleshooting:
Functional Solutions:
1. No menu serial port:
a. DS power is on and cable connected to EIA232 serial port.
b. Verify the cable and adapter has the correct pin out, RJ08X007 and 9FRJ45PC-1.
c. Cisco Rollover cables have the same pin out as RJ08X007.
b. Verify the cable and adapter has the correct pin out, RJ08X007 and 9FRJ45PC-1.
c. Cisco Rollover cables have the same pin out as RJ08X007.
System Status:
Available local memory (512 byte buffers): 16
TCP sockets in use:0
System up time (dd:hh:mm:ss):1:04:43:19
Available malloc memory: 32740
Strike CR to continue.
Available local memory (512 byte buffers): 16
TCP sockets in use:0
System up time (dd:hh:mm:ss):1:04:43:19
Available malloc memory: 32740
Strike CR to continue.
Network Status:
Medium status: fault
Medium faults: 0
Xmit bufr errs: 0
Available net buffers: 37
Receive queue status: open
Rev bufr errs: 1623
Strike ENTER to continue
Medium status: fault
Medium faults: 0
Xmit bufr errs: 0
Available net buffers: 37
Receive queue status: open
Rev bufr errs: 1623
Strike ENTER to continue
Active Users:
User Address Internal Conn Status User Name
1 * RS-232 Port + admin
User Address Internal Conn Status User Name
1 * RS-232 Port + admin
Strike "T", CR to terminate a session, CR to continue :
Reset the unit (Y/N) ?:y
Initializing System Please Wait ...........