Справочник Пользователя для Brother KE-434B
4. ASSEMBLY
４-３. Thread wiper mechanism
KE-430B, 430C series
59
After installing the thread wiper, moved the forked
part of the thread wiper driving lever and check
that the thread wiper unit moves smoothly.
part of the thread wiper driving lever and check
that the thread wiper unit moves smoothly.
Solenoid specifications
Note:
If the thread wiper unit does not move smoothly,
error E-60 may be displayed.
error E-60 may be displayed.
3339Q
Adjust while referring to “5-17. Adjusting the
thread wiper”.
thread wiper”.
Tighten the set screw while lightly
pressing the work clamp lever lifter
shaft.
pressing the work clamp lever lifter
shaft.
1. Thread wiper rod assy
[Insert from above]
2. Thread wiper driving lever
3. Thread wiper shaft (with washer and
3. Thread wiper shaft (with washer and
retaining ring)
4. Set screw
3341Q
5. Thread wiper rod assy
[Place onto the work clamp lever lifter
shaft]
shaft]
6. Retaining ring
7. Work clamp lever lifter shaft
8. Set screw
9. Tension release lever spring
10. Retaining ring
11. Thread wiper arm assy
12. Retaining ring
13. Set screw [Temporarily tighten]
14. Thread wiper
15. Plain washer
16. Screw
17. Tension release stud
7. Work clamp lever lifter shaft
8. Set screw
9. Tension release lever spring
10. Retaining ring
11. Thread wiper arm assy
12. Retaining ring
13. Set screw [Temporarily tighten]
14. Thread wiper
15. Plain washer
16. Screw
17. Tension release stud
Adjust the thread take-up spring height while
referring to “1-2. Standard thread tension”.
referring to “1-2. Standard thread tension”.
18. Tension release pin
19. Thread tension assy
20. Set screw
19. Thread tension assy
20. Set screw