Справочник Пользователя для Zanussi zwh6121 p

turn the program selector dial to

 “O”.

This option can be used for lightly soiled in order to obtain 
a good washing result in a short time. 

Quick Wash Buttons (         )

Rinse Hold (      ): by selecting this option the water of the 
last rinse is not emptied out to prevent the fabrics from 
creasing.

When the program has finished the pilot lights 

“End Cycle 

(      )” is on, the Start/Pause (      ) and the “Washing 
(      )” pilot light are off and the door is locked to indicate 
that the water must be emptied out.

Auto Spin Reduction (       ): by selecting a programme,  

reduce the spin speed if needed, by means of the 
relevant button.

depress

 Start/Pause (      ) button.

at the end of program, only the pilot light 

End Cycle 

(       ) comes on.

select the

 Drain (     ) or Spin (     ) program.

To empty out the water:

The washing time will be reduced according to type of 
fabric and the selected temperature.

13

Spin Buttons (      )

If an option is chosen that is not allowed with the selected 
program, the

 red pilot light of the Start/Pause (      ) button 

will flash 3 times.

set the washing machine to PAUSE by pressing the 
Start/Pause (      ) button;

Before you start the program, if you wish to delay the 
start, press the Delay Start button repeatedly, to select the 
desired delay. The relevant light illuminates.

This option makes it possible to delay the starting of the 
washing program by 3, 6, and 9 hours. 

You must select this option after you have set the program 
and before you press the Start/Pause button. You can 
cancel the delay time at any moment, before you press the 
Start/Pause button.

If you have already pressed the Start/Pause button, and you 
wish to cancel the delay time, proceed as follows:

Select the Delay Start (      )

press the

 Delay Start (      ) button once, the light 

relevant to the selected delay goes off.
press the

 Start/Pause (      ) button again to start the 

programme.

the appliance proposes automatically the maximum spin 
speed provided for that programme. By selecting Automatic 
Spin reduction the spin speed is reduced to a half, but not 
less than 400 rpm. The relevant light illuminates.