Справочник Пользователя для Konica Minolta 7013 psc
TCP/IP Configuration-42
3. The main menu is displayed. This utility lets you change the IP Parameters, lpd/
lpr printers, protocols, restore to factory defaults, and change password. Press the
number for the parameter you wish to check or change and press Enter.
4. To end your Telnet session, type E at the Main Menu. If you have made any
changes you are prompted to either Save Changes and Exit or Exit Without Saving
Changes. Choose your option and press Enter.
Note:
Press ? to access the Telnet help utility.
7.6.2 Configure IP Parameters
Although the Print Server Card must have an IP address before a Telnet Connection
can be made, you can use the utility to change the address or the other IP parameters.
The Print Server Card will automatically initiate a soft reset when the IP address
change is sensed.
can be made, you can use the utility to change the address or the other IP parameters.
The Print Server Card will automatically initiate a soft reset when the IP address
change is sensed.
Note:
This will cause the Telnet connection to be broken. It is advisable to make all other
desired changes before changing the IP address.
1. At the Main Menu, type 1 and press Enter to bring up the IP Parameters menu
(shown on the next page).
The Configuration Utility
Unit Serial no. 221963 V4.10
Unit Serial no. 221963 V4.10
Main Menu
1. IP Parameters
2. LPD Printers
3. Protocols
4. Restore Factory Defaults
5. Change Password
E. Exit
2. LPD Printers
3. Protocols
4. Restore Factory Defaults
5. Change Password
E. Exit