Справочник Пользователя для National Instruments PCI-1428
© National Instruments Corporation
B-1
B
Cabling
This appendix contains cabling requirements for the PCI-1428, including
Camera Link cable ordering information.
Camera Link cable ordering information.
68-Pin VHDCI Cable Specification
National Instruments offers cables and accessories for connecting to video
sources, trigger sources, or synchronization sources. However, if you want
to develop your own cable for the 68-pin VHDCI connector, you must use
twisted pairs for each signal.
sources, trigger sources, or synchronization sources. However, if you want
to develop your own cable for the 68-pin VHDCI connector, you must use
twisted pairs for each signal.
For information on connector pin assignments, see the
section
in Chapter 4,
.
Camera Link Cables
Use a 3M Camera Link cable or build your own cable (not recommended)
to connect your camera to the MDR 26-pin connector on the PCI-1428
device. Camera Link cables consist of two MDR-26 male plugs linked with
a twin-axial shielded cable and are available in two shell configurations.
to connect your camera to the MDR 26-pin connector on the PCI-1428
device. Camera Link cables consist of two MDR-26 male plugs linked with
a twin-axial shielded cable and are available in two shell configurations.
For more information on Camera Link cables, reference the Specifications
of the Camera Link Interface Standard for Digital Cameras and Frame
Grabbers manual. This manual is available on several Web sites, including
the Automated Imaging Association site at
of the Camera Link Interface Standard for Digital Cameras and Frame
Grabbers manual. This manual is available on several Web sites, including
the Automated Imaging Association site at
machinevisiononline.org
.