Справочник Пользователя для Furuno gp-3500

8. ALARMS 

 

 

The arrival alarm informs you that your boat is approaching a destination 
waypoint. The area that defines an arrival zone is that of a circle which you 
approach from the outside of the circle. The alarm will be released if your boat 
enters the circle. When the arrival alarm is active, a red dashed circle marks the 
arrival alarm area. 

Alarm

Own ship's 
position

Setting range

Destination waypoint

The anchor watch alarm informs you that your boat is moving when it should be 
at rest. When the anchor watch is active, a red dashed circle marks the anchor 
watch area. 

: Alarm

Own ship's 
position

Setting range

Note: The arrival and anchor watch alarms cannot be turned on together. 

1.  Press the [MENU] key to show the main menu. 
2.  Press the [6] key to show the ALARMS SETUP menu. 
3.  Rotate the [ENTER] knob to select ARRIVAL/ANCHOR WATCH. 
4.  Press the [1] or [2] key to select “1. ARRIVAL” or “2. ANCHR” as appropriate. 
5.  Rotate the [ENTER] knob to select RANGE TO MONITOR below 

ARRIVAL/ANCHOR WATCH. 

6.  Press the numeric keys to enter the range value. (Setting range: 0.001 to 

9.999 nm) 

7.  Press the [ENTER] knob. 
8.  Press the [MENU] key several times to close the menu. 
9.  For the anchor watch alarm, place the cursor on own ship’s position and then 

press the [GOTO] key. 

The anchor watch alarm range is shown with a red dashed circle, its center own 
ship’s position at the moment you completed step 9. If own ship goes out this 
range, the audio and visual alarms are released. 

 

Note : To deactivate the alarm, select “3. OFF” at step 4.