Справочник Пользователя для Furuno gp-3500

1. BASIC OPERATION 
 
 

Note:  The MOB mark can be deleted as follows. 

c Press the [CURSOR ON/OFF] key to show the cursor. 
d Operate the trackball to place the cursor on the MOB mark. 
e Press the [CLEAR] key. 

The following message will appear is on the screen: 

WAYPOINT NAME XXXXXX

WILL BE DELETED.

ARE YOU SURE?

YES … PRESS KNOB

NO   … PRESS CLEAR KEY

f Press the [ENTER] knob. 

Then, the waypoint entered at step 1 on the previous page is erased. 

g Operate the trackball to place the cursor on the MOB mark. 
h Press the [CLEAR] key. 

A new message will appear on the screen: 

WAYPOINT NAME (MOB)

WILL BE DELETED.

ARE YOU SURE?

YES … PRESS KNOB

NO   … PRESS CLEAR KEY

When MOB is not set as destination

THIS WAYPOINT (MOB)

IS USED FOR NAVIGATION.

ILL IT BE DELETED?

YES … PRESS KNOB

NO   … PRESS CLEAR KEY

When MOB is set as destination

i Press the [ENTER] knob to erase the MOB mark. 

 

The [PROG 1] through [PROG 4] keys provide for instant display of a 
user-programmed options window (screen). Note that, the function for [VRM] key 
can also be. The default program of the [PROG] keys are as shown in the table 
below. 
 

Key Functions 

PROG 1 

Displays the WAYPOINT LIST. 

PROG 2 

Displays DELETE SHIP’S TRACKS window. 

PROG 3 

Each press changes the line style. 

PROG 4 

Reset the trip distance to zero. 

 
•Note 1: To program plotter functions to the [PROG] keys or [VRM] keys, see 

paragraph 9.5.1.