Справочник Пользователя для Furuno gp-3500
3. TRACKS
3-5
3.2
Stopping, Restarting Plotting of Own Ship Track
When your boat is at anchor or returning to port, you probably won’t need to
record its track. You can stop recording the track, to conserve the track memory,
as follows.
1. Press the [PLOT INTVL] key several times to show the “H” (Hold) icon (at the
record its track. You can stop recording the track, to conserve the track memory,
as follows.
1. Press the [PLOT INTVL] key several times to show the “H” (Hold) icon (at the
bottom of the screen). Each time the key is pressed the track function
available changes in the sequence shown below.
available changes in the sequence shown below.
TRACK INTERVAL 1 -> TRACK INTERVAL 2 -> HOLD -> TRACK INTERVAL 1
Track plotting interval or “HOLD” appears at the top right corner of the NAV INFO
1 (or 2) display. When plotting is stopped, own ship’s mark changes from a solid
circle to a hollow one and track is not stored in the memory.
Track plotting interval or “HOLD” appears at the top right corner of the NAV INFO
1 (or 2) display. When plotting is stopped, own ship’s mark changes from a solid
circle to a hollow one and track is not stored in the memory.
HOLD icon
FISH
000001
43
20
21
22
42
41
TRKS HOLD
2003. 1. 1
34
°
44.1447'N
135
°
21.0758'E 350.2
°
T
9.9
kt
00:01
Own ship's mark
Current interval
or "TRKS HOLD"
or "TRKS HOLD"
H
0.3nm
GPS2D
WGS84
Stopping plotting track (ex. PLOTTER NAV INFO 1 display)
Note:
If the track plotting interval is not shown in the NAV INFO window, see
paragraph 9.6.2.
2. To restart plotting, press the [PLOT INTVL] key.
Note:
Plotting can also be stopped or restarted from the full screen echo
sounder display.