Справочник Пользователя для Furuno gp-3500
4-1
4. MARKS & LINES
Marks are useful for denoting important points such as a good fishing spot. The
default setting allows you to enter 4,000 marks and line points. Marks can be
inscribed in 11 shapes and seven colors of red, yellow, green, light-blue, purple,
blue and white.
default setting allows you to enter 4,000 marks and line points. Marks can be
inscribed in 11 shapes and seven colors of red, yellow, green, light-blue, purple,
blue and white.
4.1 Entering
Marks
You can enter marks three ways:
• Enter a mark at own ship position
• Enter a mark at the cursor position
• Enter mark by latitude and longitude position
Note: The number of marks and lines used appears at the bottom of the
• Enter a mark at own ship position
• Enter a mark at the cursor position
• Enter mark by latitude and longitude position
Note: The number of marks and lines used appears at the bottom of the
MARKS/SHIP’S TRACKS EDITION menu. (See page 4-2.)
Entering a mark at own ship position
1. Press the [CURSOR ON/OFF] key to turn off the cursor.
2. Press the numeric key corresponding to the mark you wish to enter.
2. Press the numeric key corresponding to the mark you wish to enter.
[1] key:
[2] key:
[3] key:
[4] key: Y
[5] key:
[6] key:
[7] key:
[8] key:
The water temperature and depth at the mark position are memorized
automatically when the appropriate sensors are connected.
automatically when the appropriate sensors are connected.
Entering a mark at the cursor position
1. Press the [CURSOR ON/OFF] key to show the cursor.
2. Operate the trackball to place the cursor at the location where you want to
2. Operate the trackball to place the cursor at the location where you want to
enter a mark.
3. Press the numeric key corresponding to the mark you wish to enter.