Справочник Пользователя для Furuno gp-3500
5-1
5. WAYPOINT
In navigation terminology, a waypoint is a particular location on a voyage
whether it be a starting, intermediate or destination point. A waypoint is the
simplest piece of information your equipment requires to get you a destination, in
the shortest distance possible.
whether it be a starting, intermediate or destination point. A waypoint is the
simplest piece of information your equipment requires to get you a destination, in
the shortest distance possible.
5.1 Entering
Waypoints
This unit has 3500 waypoints into which you can enter position information.
There are seven methods by which you can enter a waypoint: at own ship’s
position, by cursor, by latitude and longitude, by range and bearing, by Loran-C,
by Loran-A LOP and by Decca LOP.
There are seven methods by which you can enter a waypoint: at own ship’s
position, by cursor, by latitude and longitude, by range and bearing, by Loran-C,
by Loran-A LOP and by Decca LOP.
5.1.1
Entering waypoints at own ship’s position
•
Press the [SAVE/MOB] key momentarily.
The message “WAYPOINT XXXXXX IS SAVED! CONTINUE PRESSING FOR
MOB!” appears for three seconds to let you know that ship’s position is saved as
a waypoint. The default waypoint mark is a yellow solid circle. You can know
shape and color of the selected waypoint by the icon ( ) at the bottom of the
plotter (or pilot) display. This new waypoint will automatically be saved in the
waypoint list under the next consecutive waypoint number.
MOB!” appears for three seconds to let you know that ship’s position is saved as
a waypoint. The default waypoint mark is a yellow solid circle. You can know
shape and color of the selected waypoint by the icon ( ) at the bottom of the
plotter (or pilot) display. This new waypoint will automatically be saved in the
waypoint list under the next consecutive waypoint number.
Note:
If the waypoint icon does not appear at the bottom of the plotter (or pilot)
display, do the following.
a) Press the [MENU], [0], [1] in that order to show the DISPLAY SETUP menu.
b) Select “1. ON” at “WAYPOINT STATUS” from page 2/2.
b) Select “1. ON” at “WAYPOINT STATUS” from page 2/2.