Справочник Пользователя для National Instruments NI PCI-6111

6.

If required, screw the mounting bracket of the NI PCI-6110/6111 to the 
back panel rail of the computer.

7.

Visually verify the installation by making sure the device is not 
touching other devices or components and is fully inserted into the slot.

8.

Replace the cover.

9.

Plug in and power on the computer.

The NI PCI-6110/6111 is now installed. You are now ready to configure the 
device. Refer to the software documentation for configuration instructions.

The NI standard architecture for data acquisition and the PCI bus 
specification make the NI PCI-6110/6111 completely software 
configurable. You must perform two types of configuration on the 
NI PCI-6110/6111—bus-related and data acquisition-related 
configuration.

The NI PCI-6110/6111 is fully compatible with the industry standard 
PCI Local Bus Specification Revision 2.2. This allows the PCI system 
to automatically perform all bus-related configurations. Bus-related 
configuration includes setting the device base memory address and 
interrupt channel. 

Data acquisition-related configuration, which you must perform, includes 
such settings as AI coupling and range, and others. You can modify these 
settings using NI-DAQ or application level software, such as LabVIEW, 
Measurement Studio, and VI Logger.

To configure the device using Measurement & Automation Explorer 
(MAX), refer to either the DAQ Quick Start Guide or to the NI-DAQ User 
Manual for PC Compatibles. For operating system-specific installation and 
troubleshooting instructions, refer to 

ni.com/support/daq

.