Справочник Пользователя для National Instruments daq pci-pxi-783xr

© National Instruments Corporation

Installing the NI 78xxR

You can install the NI PCI-78xxR in any available PCI expansion slot in the computer, and the 
NI PXI-78xxR in any available peripheral slot in the PXI or CompactPCI chassis. To achieve the best 
noise performance, leave as much room as possible between the NI PCI-78xxR and other boards.

You must install the software before installing the hardware. For software installation 

.

1.

Power off and unplug the computer or PXI chassis.

Refer to the Read Me First: Safety and Radio-Frequency Interference document packaged 

with your PXI chassis or device before removing equipment covers or connecting or disconnecting 
any signal wires.

2.

Remove the computer cover and/or the expansion slot cover on the computer, or the filler panel of 
an unused PXI slot on the PXI chassis.

3.

Touch any metal part of the computer or chassis to discharge any static electricity.

4.

For the NI PCI-78xxR, insert the device into the applicable PCI system slot on your computer. 
Gently rock the device into place. Do not force the device into place. For the NI PXI-78xxR, 
insert the device into the PXI slot. Use the injector/ejector handle to fully inject the NI PXI-78xxR 
into place.

Installing an NI PCI-78xxR Device

1

NI PCI-78xxR Device

2

PCI System Slot

3

PC with PCI Slot

3

1

2