Справочник Пользователя для National Instruments NI 9265
NI 9265 Operating Instructions and Specifications
10
ni.com
You must connect an external power supply to the NI 9265. This
power supply provides the current for the devices you connect to
the module. Connect the positive lead of the power supply to the
supply terminal, V
power supply provides the current for the devices you connect to
the module. Connect the positive lead of the power supply to the
supply terminal, V
sup
, and the negative lead of the power supply to
Power Supply COM.
When the module powers on, the channels output the startup
current. Refer to the
current. Refer to the
section for more information
about startup current. Refer to the software help for information
about configuring startup output states in software. Visit
about configuring startup output states in software. Visit
ni.com/info
and enter
cseriesdoc
for information about
C Series documentation.
Wiring for High-Vibration Applications
If an application is subject to high vibration, National Instruments
recommends that you either use ferrules to terminate wires to the
detachable screw-terminal connector or use the NI 9932 backshell
kit to protect the connections. Refer to Figure 4 for an illustration
of using ferrules. Refer to Figure 1 for an illustration of the
NI 9932 connector backshell.
recommends that you either use ferrules to terminate wires to the
detachable screw-terminal connector or use the NI 9932 backshell
kit to protect the connections. Refer to Figure 4 for an illustration
of using ferrules. Refer to Figure 1 for an illustration of the
NI 9932 connector backshell.