Справочник Пользователя для Funai drv-b2734

31

EN

• The timer recording cannot be performed in DVD 

and VCR at the same time. If you set two 
programmings with the same channel and time both 
in DVD and VCR, the programming that has priority 
will be recorded.

• You cannot make any DVD operation during DVD 

timer recording.

• You cannot make any VCR operation during VCR 

timer recording.

• If the Start and End times are same, the length of 

the recording will be set for 24 hours. If the disc 
becomes full during recording, the unit will turn itself 
off. To continue recording, press [T-SET] to cancel 
the timer stand-by mode, insert a recordable disc 
and press [T-SET] again.

• If two or more programmes overlap, “Overlap” and 

the overlapped programme number will appear on 
the display.

• If the Start time is earlier and the End time is later 

than the current time, the recording will start 
immediately after you press [T-SET].

• If a videotape ends during timer recording, the unit 

will automatically stop, eject the videotape, and turn 
itself off. To continue recording, insert a recordable 
tape.

Priority of overlapped settings
The unit records programmes according to priority if 
timer programmes overlap.

If the starting time is same:
• The timer programming set first (PROG. 1) has 

priority.

If programming has been made at the end of the 
programming (PROG. 1) currently being recorded:
• The timer programming set first (PROG. 2) has 

priority. PROG. 3 will not be recorded.

If the recording time is partially overlapped:
• The timer programming with the earlier start time 

(PROG. 2) has priority. PROG. 1 will start after 
PROG. 2 recording is complete.

If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not 

recorded.

Note for DVD recording
• If the recording time of two programmes overlap, or 

the End time of a programme and the Start time of 
another is same, the first 30 seconds (at the most) 
of the subsequent programme are cut off.

If the End time of the programme currently being 
recorded and the Start time of the subsequent 
programme are same:
• If PROG. 1 is a DVD recorded programme, the 

beginning of PROG. 2 may be cut off.

* If the cut off time exceeds 1 minute, the error 

number “E40” will appear in the timer programming 
list.

PROG. 2 
recording 
will start 
after 
PROG. 1 
recording is
completed.

Additional 30 seconds (at the most) are cut off

PROG. 2 
recording 
will start 
after 
PROG. 1 
recording is 
completed.

Additional 30 seconds (at the most) are cut off

Additional 30 seconds (at the most) are cut off

The first 30 seconds 
(at the most) are cut off.*

DRV_B2737_B2734.book  Page 31  Thursday, March 31, 2005  10:04 PM