Справочник Пользователя для Crestron io qm-ftmc qmi-ftmc

FlipTop Media Center 

 

 

Crestron QM-FTMC 

Digital Inputs:  
<fb1> through <fb20> 

Activates the corresponding LED for as long as the 
input is high. 
If two buttons are combined, then only the LED for the 
top button in the vertical pair will be visible. 
High/1 (level sensitive) = Activate LED feedback;  
Low/0 = Turn off LED 

Digital output: 
<FlipTopOpen> 

Indicates that the FlipTop cover is fully open. The 
feedback remains high for as long as the cover is open.  
If the cover is not fully open the signal will go low, the 
keypad buttons will be disabled and the unit will not 
report any button presses. 
High/1 = FlipTop open; Low/0 = FlipTop not fully open 

Analog input: 
<Bargraph1> 

Sets the levels that will be displayed on the left 
bargraph. The bargraph is an 8-segment LED and is 
proportional to the input. 
Valid values range from 0% to 100%. 

Analog input: 
<Bargraph2>  

Sets the levels that will be displayed on the right 
bargraph. The bargraph is an 8-segment LED and is 
proportional to the input. 
Valid values range from 0% to 100%. 

An example program for the QM-FTMC is available from the “Example 
Program” section of the Crestron website 
(www.crestron.com/exampleprograms

)

. Search for QM-FTMC.ZIP. 

• FlipTop Media Center: QM-FTMC