Справочник Пользователя для Danby DDW399W

7

• Dishwasher not receiving 

• Check electrical connection

electrical power.

Fuse/circuit breaker.

• Door is unlatched.

• Close and latch door.

• Dishwasher not level.

• Level unit.

• Improper loading.

• Arrange dishes so spray action 

reaches all surfaces.

• Do not overload dishwasher.

• Spray arm not rotating freely.

• Check spray arm to make sure 

nothing (i.e. cutlery) is 
obstructing spray arm rotation.

• Check if filter screen has  

become dislodged and 
obstructing  spray arm rotation.

• Not enough detergent and/or

• Use more dishwasher detergent.

improper detergent being used.

• Do not use detergent that is

hard or caked.

• Use only a recommended 

dishwasher detergent.

• Improperly prepared dishes.

• Excess food soil and liquids 

should be removed from dishes 
before loading.

• Water inlet hose kinked/bent 

• Eliminate kink or bend from  

due to improper installation.

inlet hose.

• Improper loading of dishes.

• Do not overload dishrack. Load 

glasses on the upper rack only, 
not over dishrack pins. Glasses 
loaded over dishrack pins are  
not properly supported and 
subject to damage.

• A small amount of water 

• This is necessary to keep the pump

(in sump area) is normal.

primed and is drained automatically 
at the beginning of each cycle.

• Excessive amount of water;

• Allow dishwasher to complete  

Cycle not completed.

full cycle.