Справочник Пользователя для Cabletron Systems brim f6 brim-f6
The Full Duplex Configuration Screen
HSIM-F6 User’s Guide
3-25
3.9.2
Full Duplex Configuration Screen Fields
The following list describes each of the Full Duplex Configuration screen
fields:
fields:
Operation Mode
This is a read-only field that displays the current operating parameters of
the port. This field reads “Standard FDDI” or “Full Duplex”.
the port. This field reads “Standard FDDI” or “Full Duplex”.
Link Status
This is a read-only field that will display “Link” or “No Link”.
Port Status
This is a read-only field that will display “Enabled” or “Disabled”.
SET OPERATION MODE
This field toggles between [STANDARD FDDI] and [FULL DUPLEX].
To change the current selection, use the arrow keys to highlight the field
and press the SPACE bar.
To change the current selection, use the arrow keys to highlight the field
and press the SPACE bar.
DESIRED OPERATION MODE
This read-only field displays the desired operation mode of the HSIM-F6.
In some cases, the HSIM-F6 will not begin operating in full duplex mode
immediately. This field confirms that changes to the SET OPERATION
MODE field have been saved, and the HSIM-F6 is in the process of
changing to the operation mode that is displayed in this field.
In some cases, the HSIM-F6 will not begin operating in full duplex mode
immediately. This field confirms that changes to the SET OPERATION
MODE field have been saved, and the HSIM-F6 is in the process of
changing to the operation mode that is displayed in this field.
SAVE
This command saves all configuration changes to memory.