Справочник Пользователя для Brother HL-5050

DLC PRINTING 8 - 2

Select DLC Protocol and then OK or Add if using Windows

®

 

2000. You may be asked for the location of the files. For Intel 
based computers, the necessary files are stored in the i386 
directory of the Windows

®

 NT CD-ROM. If you have a non-Intel 

platform, specify the correct directory on your Windows

®

 NT 

CD-ROM. Click Continue (for NT 3.5x systems) or Close (for 
NT 4.0 systems).

Reboot your system to make the change take effect. Windows

®

 

2000 should not require a re-boot.

Log into Windows

®

 2000 with administrative privileges. From 

the Start menu, select Settings and then Printers.

Select Add Printer (If you have already installed a Brother 
printer driver, double click the printer driver that you wish to 
configure and then select Printers/Properties, select the Ports 
tab, click on Add Port and continue from Step 6 (ignoring 
steps 11-14 about installing the correct driver)).

Click Next.

Select Local Printer and make sure that Automatically detect 
and install my Plug and Play printer is not checked.

Click Next.

Select the Create a new port: option and highlight Hewlett-
Packard Network Port.

Click Next.

A list of available print server MAC addresses (Ethernet 
addresses) appears in the larger box under Card Address. 
Select the address of the desired print server (you can see the 
Ethernet address on the printer configuration page).

You can find the node name and MAC address by printing 
out the printer configuration page. Refer to the Quick Setup 
Guide for information on how to print the configuration page 
on your print server.