Справочник Пользователя для Brother MFC 9880

The temperature of the drum unit or 
toner cartridge is too hot. The 
machine will pause its current print 
job and go into cooling down mode. 
During the cooling down mode, you 
will hear the cooling fan running 
while the display on the machine 
shows COOLING DOWN.

You must wait and allow the 
machine to resume printing when 
it is ready.

The front cover was not completely 
closed.

Open, then close the front cover.

The other party or other party’s fax 
machine terminated the call.

Try to re-transmit or call the other 
party to see what happened.

MACHINE ERROR XX Machine has a mechanical problem.

Turn off the power.

Then contact your Brother dealer 
for service.

NO RESPONSE/BUSY The number you called does not 

answer or is busy. Or, you may have 
reached number that is not connected 
to a fax machine.

Check the number and try again.

You tried to access a One Touch or 
Speed Dial number that is not 
programmed.

Set up the One Touch or Speed 
Dial number. (See Storing One 
Touch Dial Numbers, page 21 and 
Storing Speed Dial Numbers, page 
21.)

OUT OF MEMORY
(When the machine is 
used as a printer.)

The machine memory capacity has 
been exceeded.

- Press Reset to delete data 

remaining in the memory of 
the machine.

- If you have installed the 

Windows

®

 driver, try again 

after setting the True Type 
mode to “Print as Graphics” in 
the PRINT menu of your 
application software.

- Reduce the print resolution or 

reduce the complexity of your 
document.

- Expand the printer memory 

with the optional memory 
board. 

OUT OF MEMORY
(When the machine is 
used as a copier.)

The machine memory capacity has 
been exceeded.

The recording paper is jammed in the 
machine.