Справочник Пользователя для IBM as-400
Chapter 2. Configuring AS/400 for communications
Follow these steps to configure your AS/400:
1. Depending on the type of hardware you have, you may need to refer to the following topics:
1. Depending on the type of hardware you have, you may need to refer to the following topics:
v Creating a network server description
v Creating a network interface description
2. You define lines by creating line descriptions. Depending on your hardware, the lines may be attached
to a network server, or a network interface.
Creating a network interface description
Network interface descriptions for asynchronous transfer mode (ATM), frame relay, and integrated services
digital network (ISDN) protocols describe the communications interface.
digital network (ISDN) protocols describe the communications interface.
To create a network interface description, do the following:
1. Type one of these commands on any AS/400 command line for the type of network interface you are
1. Type one of these commands on any AS/400 command line for the type of network interface you are
creating and press F4:
v Create Network Interface (ATM) (CRTNWIATM)
v Create Network Interface (ATM) (CRTNWIATM)
v Create Network Interface (Frame Relay Network) (CRTNWIFR)
v Create Network Interface Description for ISDN (CRTNWIISDN)
2. Use the on-line help information to choose the correct parameter values.
3. Press Enter. The network interface description is created.
3. Press Enter. The network interface description is created.
Creating a network server description
A network server description describes which Integrated PC Server the local area network (LAN) and the
application will be using.
application will be using.
To create a network server description, do the following:
1. Type the Create Network Server Description (CRTNWSD) command on any AS/400 command line and
1. Type the Create Network Server Description (CRTNWSD) command on any AS/400 command line and
press F4.
2. Use the on-line help information to choose the parameter settings.
3. Press Enter. The network server description is created.
3. Press Enter. The network server description is created.
Creating a line description
You create line descriptions to describe the physical line connection and the data link protocol to be used
between the AS/400 system and the network.
between the AS/400 system and the network.
To create line descriptions, do the following:
1. Type one of these commands on any AS/400 command line to define the type of line you are creating
1. Type one of these commands on any AS/400 command line to define the type of line you are creating
and press F4.
v Create Line Description (Ethernet) (CRTLINETH)
v Create Line Description (Ethernet) (CRTLINETH)
v Create Line Description (Distributed Data Interface (DDI)) (CRTLINDDI)
v Create Line Description (Frame Relay) (CRTLINFR)
v Create Line Description for (IDLC) (CRTLINIDLC)
v Create Line Description (Synchronous Data Link Control (SDLC)) (CRTLINSDLC)
v Create Line Description (Token-ring) (CRTLINTRN)
v Create Line Description (Wireless) (CRTLINWLS)
v Create Line Description (X.25) (CRTLINX25)
2. Use the online help information to choose the correct parameter values.
3. Press Enter. The line description is created.
3. Press Enter. The line description is created.
© Copyright IBM Corp. 1998, 2001
5