Справочник Пользователя для ZyXEL Communications prestige 314 plus

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

13-6 

System Maintenance & Information 

Enter the time service protocol that your time server sends when you turn on the 
Prestige. Not all time servers support all protocols, so you may have to check with 
your ISP/network administrator or use trial and error to find a protocol that works. 
The main differences between them are the format.  

 Daytime (RFC 867) format is day/month/year/time zone of the server. 

 Time (RFC-868) format displays a 4-byte integer giving the total number of 
seconds since 1970/1/1 at 0:0:0. 

 NTP (RFC-1305) is similar to Time (RFC-868). 

Use Time Server 
when Bootup 

 None is the default value. Enter the time manually. Each time you turn on the 
Prestige, the time and date will be reset to 2000-1-1 0:0:0. 

Time Server IP 
Address 

Enter the IP address of your time server or its domain name (if your time server is 
using DNS). Check with your ISP/network administrator if you are unsure of this 
information. 

Current Time 

This field displays an updated time only when you reenter this menu. 

New Time 

Enter the new time in hour, minute and second format. 

Current Date 

This field displays an updated date only when you reenter this menu. 

New Date 

Enter the new date in year, month and day format. 

       Menu 24.10 - System Maintenance - Time and Date Setting 

 

 

     Use Time Server when Bootup= None 

     Time Server IP Address= N/A 
 
     Current Time:              

00 : 00 : 00 

     New Time (hh:mm:ss):          

11 : 23 : 16 

 

 

     Current Date:              

2000 - 01 - 01 

     New Date (yyyy-mm-dd):         

2000 - 01 - 01 

 

     Time Zone= GMT 

 

     Daylight Saving= No 

     Start Date (mm-dd):              01 – 01 

     End Date (mm_dd):               01 – 01 
 

          Press ENTER to Confirm or ESC to Cancel: