Справочник Пользователя для National Instruments FP-3000
Index
I-2
©
National Instruments Corporation
bringing online
converting 4-20 mA pressure sensor
to Fieldbus (example), 3-6
temperature control with FP-3000
(example)
controlling heating
element, 3-12
taking temperature
readings, 3-10
FP-3000 specific parameters,
4-13 to 4-17
CFG_OPTS (table), 4-13
DEV_OPTS (table), 4-13
EXECUTION_STATISTICS
DEV_OPTS (table), 4-13
EXECUTION_STATISTICS
(table), 4-14
FIELDPOINT_CHANNEL, 4-14
FIELDPOINT_MODULE, 4-14
FP_AI_100_RANGE, 4-14
FP_AI_110_RANGE, 4-14
FP_AI_111_RANGE, 4-15
FP_AO_200_RANGE, 4-15
FP_CJC_SOURCE, 4-15
FP_MOD_STATUS (table), 4-15
FP_NOISE_REJECTION, 4-16
FP_PWM_520_PERIOD, 4-16
FP_RTD_122_RANGE, 4-16
FP_RTD_TYPE, 4-16
FP_TC_120_CJ_RANGE, 4-16
FP_TC_120_RANGE, 4-16
FP_THERMOCOUPLE_TYPE,
FIELDPOINT_MODULE, 4-14
FP_AI_100_RANGE, 4-14
FP_AI_110_RANGE, 4-14
FP_AI_111_RANGE, 4-15
FP_AO_200_RANGE, 4-15
FP_CJC_SOURCE, 4-15
FP_MOD_STATUS (table), 4-15
FP_NOISE_REJECTION, 4-16
FP_PWM_520_PERIOD, 4-16
FP_RTD_122_RANGE, 4-16
FP_RTD_TYPE, 4-16
FP_TC_120_CJ_RANGE, 4-16
FP_TC_120_RANGE, 4-16
FP_THERMOCOUPLE_TYPE,
4-16
LAST_BLOCK_EVENT (table),
4-16 to 4-17
VERSION_INFORMATION,
4-16 to 4-17
MODE_BLK parameter and mode
handling, 4-10 to 4-12
Actual modes (table), 4-11 to 4-12
Normal mode, 4-12
Permitted mode, 4-12
Target modes (table), 4-10 to 4-11
Normal mode, 4-12
Permitted mode, 4-12
Target modes (table), 4-10 to 4-11
overview, 4-1 to 4-2
PID control, 4-5 to 4-6
resource blocks, 4-2
status handling, 4-8 to 4-10
PID control, 4-5 to 4-6
resource blocks, 4-2
status handling, 4-8 to 4-10
Limit subfield values (table), 4-10
Quality subfields (table), 4-9
Substatus field, 4-9
Quality subfields (table), 4-9
Substatus field, 4-9
types of blocks, 4-1
BYPASS parameter, C-4
C
cascade initialization, D-1 to D-4
bypassing, D-4
mode and status behavior, D-2 to D-3
parameter connections, D-1 to D-2
remote cascades, D-3
mode and status behavior, D-2 to D-3
parameter connections, D-1 to D-2
remote cascades, D-3
CDO (Complete Discrete Output) function
block
description, 4-3
interlock priorities (table), 4-3 to 4-4
interlock priorities (table), 4-3 to 4-4
CFG_OPTS parameter (table), 4-13
channel and module selection. See module and
channel and module selection. See module and
channel selection.
CHANNEL parameter, C-4
CHECKBACK states (table), C-5
CLF_FSTATE parameter, C-5
Complete Discrete Output (CDO) function
CHECKBACK states (table), C-5
CLF_FSTATE parameter, C-5
Complete Discrete Output (CDO) function
block, 4-3 to 4-4
compliance specifications, E-1
configuration
configuration
configuration toggle switches
(figure), A-1
HotPnP, 2-14 to 2-15
LED indicators, 2-12 to 2-14
Reset switch, A-2
Simulate Enable switch, A-1
software configuration problems,
LED indicators, 2-12 to 2-14
Reset switch, A-2
Simulate Enable switch, A-1
software configuration problems,
B-3 to B-6
generic software configuration
problems (table), B-4 to B-6