Справочник Пользователя для Konica Minolta bizhub pro 920 scan um 110
Using the Network Scanner Features
7
bizhub PRO 920 Scanner
7-17
5
Configure the necessary items.
–
For more information on the con-
figurations on the Scanner Set-
ting Basic screen, refer to “About
the Scanner Setting Basic
Screen” on page 8-3.
figurations on the Scanner Set-
ting Basic screen, refer to “About
the Scanner Setting Basic
Screen” on page 8-3.
6
Set an original and press the [Start] button.
The original is scanned, and the scanned data are sent to an specified
destination.
destination.
7
To continue transmission, go back to
the step 5 and repeat the procedure.
To stop scanning, press [Address].
the step 5 and repeat the procedure.
To stop scanning, press [Address].
–
Then, the Select Destination/
Storage Locations screen re-
turns.
Storage Locations screen re-
turns.
–
When a lot of original is scanned, [Job Reserve] is indicated on the
screen during the scanning process.
screen during the scanning process.
–
You can press [Job Reserve] and set the next job. Immediately
upon completion of the previous job, you can set the original and
press the [Start] button.
upon completion of the previous job, you can set the original and
press the [Start] button.