Справочник Пользователя для brocade-communications-sy rfs6000
90
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
redundancy group
Common to all modes
This command displays the controller’s IP address, number of active neighbors, group license,
installed license, cluster AP adoption count, controller adoption count, hold time, discovery time,
heartbeat interval, cluster id and controller mode.
installed license, cluster AP adoption count, controller adoption count, hold time, discovery time,
heartbeat interval, cluster id and controller mode.
In a cluster, this command displays the redundancy runtime and configuration of the
“self-controller”. Use
“self-controller”. Use
config
to view only configuration information and/or
runtime
parameters.
Supported in the following platforms:
•
Mobility RFS4000 Controller
•
Mobility RFS6000 Controller
•
Mobility RFS7000 Controller
Syntax
show redundancy group [config|runtime]
Parameters
Example
RFController(config)#show redundancy group
Redundancy Group Configuration Detail
Redundancy Feature : Disabled
Redundancy group ID : 1
Redundancy Mode : Primary
Redundancy Interface IP : 0.0.0.0
Number of configured peer(s) : 0
Heartbeat-period : 5 Seconds
Hold-period : 15 Seconds
Discovery-period : 30 Seconds
Handle STP : Disabled
Controller Installed License : 48
Controller running image version : 4.02.0
Auto-revert-period : 5 mins
Auto-revert Feature : Disabled
DHCP-Server Redundancy : Disabled
Redundancy Group Runtime Information
Redundancy Protocol Version : 2.0
Redundancy Group License : 0
Cluster AP Adoption Count :
Not Applicable
Controller AP Adoption Count : Not Applicable
Redundancy State : Disabled
Radio Portals adopted by Group : Not Applicable
Radio Portals adopted by this Controller : Not Applicable
Rogue APs detected in this Group : Not Applicable
Rogue APs detected by this Controller : Not Applicable
Clients associated in this Group : Not Applicable
Clients associated in this Controller : Not Applicable
redundancy group
[config | runtime]
[config | runtime]
Displays redundancy runtime and configuration details.
•
config – Displays configured redundancy group information
•
runtime – Displays runtime redundancy group information