Справочник Пользователя для Frigidaire fwt449gf

10. Start the washer by closing the door and

Start the washer by closing the door and

Start the washer by closing the door and
pulling out the cycle selector knob.

pulling out the cycle selector knob.

pulling out the cycle selector knob. The washer
will not

not

not operate with the door

door

door open. As a safety

measure, the door

door

door will automatically lock during

the entire wash cycle.

•

To stop the washer, push in the cycle selector
knob.

•

To change a cycle, push in the cycle selector
knob and turn it clockwise to the desired
setting.

•

Pull out the knob to restart the washer.

11. Remove items when cycle ends.

Remove items when cycle ends.

Remove items when cycle ends. When the
Cycle Signal control is on, a signal will sound at
the end of the cycle.

(continued, reverse side)

4. Add laundry load to the wash drum.

Add laundry load to the wash drum.

5. Open the dispenser drawer and add the

Open the dispenser drawer and add the

Open the dispenser drawer and add the
measured amount of detergent to the

measured amount of detergent to the

measured amount of detergent to the
detergent compartment.

detergent compartment.

detergent compartment. If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
The washer will not operate with the drawer
open.

6. Set Wash/Rinse Temperature according to

Set Wash/Rinse Temperature according to

Set Wash/Rinse Temperature according to
fabric type and soil level of each load.

fabric type and soil level of each load.

See Control Settings Chart

Control Settings Chart

Control Settings Chart (reverse side) for

more information on suggested water
temperatures.

7. Select desired Cycle Signal volume.

Select desired Cycle Signal volume.

8. If desired, select Extra Rinse in the Regular or

If desired, select Extra Rinse in the Regular or

If desired, select Extra Rinse in the Regular or
Perm Press cycle.

Perm Press cycle.

9. Push in the cycle selector knob and turn it

Push in the cycle selector knob and turn it

Push in the cycle selector knob and turn it
clockwise to the desired wash cycle.

clockwise to the desired wash cycle.

clockwise to the desired wash cycle. See
Cycle Selection

Cycle Selection

Cycle Selection (reverse side) for cycle descriptions
and the Control Settings Chart

Control Settings Chart

Control Settings Chart for suggested

cycle settings.

FWT449GF

OPERA

OPERATING INSTRUCTIONS

TING INSTRUCTIONS

Befor

Before Operating Y

e Operating Y

e Operating Your

our

Washer

asher

Read your washer Owner's Guide.

Read your washer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best washing results.

To reduce the risk of fire, electric

shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your washer Owner's Guide
before operating this appliance.

Operating Steps

Read and follow Washing Procedures

Washing Procedures

Washing Procedures in your

Owner's Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.

1. Sort laundry into loads that can be washed

Sort laundry into loads that can be washed

Sort laundry into loads that can be washed
together.

together.

2. Prepare items for washing

Prepare items for washing

Prepare items for washing.

3. Pretreat stains and heavy soil.

Pretreat stains and heavy soil.

Cut along this edge to separate English from other languages.

Printed in U. S. A.

Note:

Note: From time to time you may see water in the
bleach and fabric softener compartments. This is a
result of the siphoning action and is part of the
normal operation of the washer.

P/N 131771500 (9805)

REGULAR

PULL TO START/

PUSH TO STOP

PREWASH

HEAVY WASH

WASH

R I N S E S
& SPINS

FINAL
S P I N

WASH

R I N S E S
& SPINS

FINAL
S P I N

WASH

FINAL
S P I N

KNITS &

KNITS &
DELICA

DELICA

DELICATES

TES

PERM PRESS