Справочник Пользователя для Fujitsu ScanSnap S510M

33

This chapter describes how to replace and purchase consumables and regular replacement parts.

The following table lists the part numbers of consumables and shows rough guidelines for replacing these 
parts.

These replacement cycles are rough guidelines when A4/Letter wood-free paper 80g/m

2

 (21 lb) is used. 

The actual cycle may differ depending on the scanned paper. 

Use only the consumables specified by PFU LIMITED.

• Before you replace the consumables of the ScanSnap, unplug the power cable from the 

power outlet to prevent from fire or electric shock.

• To avoid injuries, do not place the internal parts (such as the Pad ASSY and pick roller) 

in areas where small children can reach.

1

Pick roller

PA03360-0001

100,000 sheets or one year

2

Pad ASSY

PA03360-0002

50,000 sheets or one year

HINT

Use the following procedure to check the target values for 

replacement and usage information of consumables.

1. Click and hold the ScanSnap Manager icon in the Dock

menu.

2. Click [Check consumable supplies] on the menu.

⇒

The "ScanSnap Manager - Check consumable 

status" window appears. This window indicates 
how many times consumables have been used.

Replace consumables using "Target value to change supplies" as guidelines.
For details about purchasing consumables, visit the website below or contact the FUJITSU 

scanner dealer where you purchased your ScanSnap.
[Website] http://scansnap.fujitsu.com/

For information on how to replace the Pad ASSY and the pick roller, refer to "9.2 Replacing 

the Pad ASSY" and "9.3 Replacing the Pick Roller" respectively in the "ScanSnap 

S510M Operator’s Guide."