Справочник Пользователя для FMI CGDV32PR
www.fmiproducts.com
116646-01J
26
5
6
Figure 49 - Installing Logs No. 5 and No. 6
FIREplaCE INSTallaTION
Continued
6. Place log #6 (left log) onto two pins
on left side of back and front log. See
Figure 49.
Figure 49.
7. Place lava rock along sides and front of
firebox bottom in areas that are visible
only. It is not necessary to use all of the
lava rock provided.
only. It is not necessary to use all of the
lava rock provided.
8. Pull ember material apart into pieces no
larger than a dime. Place these pieces
loosely and sparingly directly onto ex-
posed section of front burner and along
space between burner and grate prongs
(see Figure 50). This will create the
glowing ember appearance as the flame
touches the ember material. Do not block
air slots by using too much ember material
loosely and sparingly directly onto ex-
posed section of front burner and along
space between burner and grate prongs
(see Figure 50). This will create the
glowing ember appearance as the flame
touches the ember material. Do not block
air slots by using too much ember material
Ember Material
Figure 50 - Placing Ember Material on
Burner
OpERaTION
4
Figure 48 - Installing Log No. 4
in one area. Do not block pilot ports with
embers. It is not necessary to use all of
the ember material provided.
embers. It is not necessary to use all of
the ember material provided.
9. Close glass door, lock door latches,
replace screen and close louvers (see
steps 5 and 7 of Removing Glass Door,
page 24).
steps 5 and 7 of Removing Glass Door,
page 24).
FOR YOUR SAFETY
READ bEFORE LIGHTING
WARNING: If you do not fol-
low these instructions exactly,
a fire or explosion may result
causing property damage, per-
sonal injury or loss of life.
A. This appliance is equipped with an
ignition device which automatically
lights the pilot. Do not try to light the
pilot by hand.
lights the pilot. Do not try to light the
pilot by hand.
B. BEFORE LIGHTING smell all around
the appliance area for gas. Be sure to
smell next to the floor because some
gas is heavier than air and will settle
on the floor.
smell next to the floor because some
gas is heavier than air and will settle
on the floor.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch.
• Do not use any phone in your building.
• Immediately call your gas supplier
• Do not try to light any appliance.
• Do not touch any electric switch.
• Do not use any phone in your building.
• Immediately call your gas supplier
from a neighbor’s phone. Follow the
gas supplier’s instructions.
gas supplier’s instructions.
• If you cannot reach your gas sup-
plier, call the fire department.
C. Use only your hand to push in or turn
the gas control knob. Never use tools.
If the knob will not push in or turn by
hand, don't try to repair it, call a qualified
service technician. Force or attempted
repair may result in a fire or explosion.
If the knob will not push in or turn by
hand, don't try to repair it, call a qualified
service technician. Force or attempted
repair may result in a fire or explosion.
D. Do not use this appliance if any part
has been under water. Immediately call
a qualified service technician to inspect
the appliance and to replace any part of
the control system and any gas control
which has been under water.
a qualified service technician to inspect
the appliance and to replace any part of
the control system and any gas control
which has been under water.