Справочник Пользователя для FMI flame-max fvfm27nr

www.fmiproducts.com

121353-01H

SAFETY

WARNING: Improper

installation,  adjustment,
alteration,  service  or
maintenance  can  cause
injury  or  property  dam-
age. Refer to this manual
for  correct  installation
and  operational  proce-
dures.  For  assistance  or
additional  information
consult  a  qualified  in-
staller, service agency or
the gas supplier.

WARNING: This ap-

pliance  is  for  installation
only in a solid-fuel burning
masonry  or  UL127  fac-
tory-built fireplace, or in a
listed ventless firebox en-
closure. It is design certi-
fied for these installations
in  accordance  with  ANSI
Z21.11.2.  Exception:  Do
not  install  this  appliance
in a factory-built fireplace
that  includes  instructions
stating it has not been test-
ed or should not be used
with unvented gas logs.

This appliance may be in-
stalled in an aftermarket,*
permanently  located,
manufactured  (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use  with  the  type  of  gas
indicated  on  the  rating
plate.  This  appliance  is
not  convertible  for  use
with other gases.

* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer

WARNING: This product

contains and/or generates

chemicals known to the State

of California to cause cancer or

birth defects, or other reproduc-

tive harm.

IMPORTANT: Read this owner’s

manual carefully and completely

before trying to assemble, op-

erate, or service this heater.

Improper use of this heater can

cause serious injury or death

from burns, fire, explosion,

electrical shock, and carbon

monoxide poisoning.

TAbLE OF CONTENTS

Safety .................................................................. 2
Product Identification ........................................... 5
Local Codes......................................................... 5
Unpacking............................................................ 5
Product Features ................................................. 5
Remote Control Accessories ............................... 6
Air for Combustion and Ventilation ...................... 6
Installation ........................................................... 8
Operation ........................................................... 18
Inspecting Burners............................................. 22

Cleaning and Maintenance ................................ 23
Wiring Diagram .................................................. 24
Troubleshooting ................................................. 24
Specifications .................................................... 28
Replacement Parts ............................................ 28
Service Hints ..................................................... 28
Technical Services ............................................. 28
Accessories ....................................................... 29
Parts .................................................................. 30
Warranty ..............................................Back Cover